The BalconyMax is a compact plug-and-play solar kit, designed for easy installation on an apartment balcony.

It allows you to produce your own green electricity and reduce your bill simply by plugging it into a standard electrical outlet.

The HomeFlex is a more complete and scalable solar system, suitable for individual homes.
It offers greater power and installation flexibility, ideal for covering a significant portion of your energy needs or aiming for maximum self-consumption.

Plug & Play photovoltaic systems consist of one or more solar modules, usually with a module inverter (micro-inverter) or a regulated inverter and a cable with plug for each.

As soon as the installation is in operation, the electricity produced directly supplies the building's electrical circuit and is directly consumed by the customer in the best case scenario.

Yes, our solar panels are designed to withstand extreme weather conditions, including hail, snow and strong winds.

They meet international certification standards.

Since the outlets work in both directions, the SunnyPlug station simply injects the solar electricity it produces into your home via the outlet. This solar electricity then immediately powers all your electrical appliances via your main switchboard.

According to the physical principle of electricity, your devices will in fact use solar electricity as a priority because it is the electricity that comes from the shortest path.

And if you produce electricity not consumed by your devices, this so-called surplus electricity will simply be injected into the network

The useful life of solar panels is typically 25 years or more, with a performance guarantee that ensures they will still produce a high percentage of their initial power after 25 years.

The BalconyMax and HomeFlex systems operate on direct self-consumption.
The electricity produced is consumed instantly by your devices.

You don't necessarily need batteries, but you can add a storage system (batteries) to the HomeFlex to increase your self-consumption rate and use solar energy at night or on cloudy days.

You can connect up to 4 panels maximum to the same outdoor socket and to the same socket circuit, i.e. 600Wc maximum power for the BalconyMax solution and 2 panels for the HomeFlex solution.

Please note that for safety reasons, do not plug into a power strip and make sure that there are no high-energy appliances connected to this outlet circuit, such as an oven or multiple appliances with a power greater than 1000W.

The panels are very recyclable at 94% because they are made mainly of glass and aluminum.

We recommend cleaning the station panels once a year with a little dishwashing liquid, a non-abrasive brush or sponge and rinsing with water (demineralized if possible).

Avoid using a Karcher to avoid damaging the solar panels.

Choose BalconyMax if you live in an apartment with a balcony, are looking for a very simple, quick-to-install and budget-friendly solution to start generating your own electricity.

Choose HomeFlex if you own a house and a deck, are aiming for greater energy production, want a scalable system, and are ready to invest in a more comprehensive installation to maximize your energy independence.

Yes, our stations are designed as plug-and-play kits and can be installed by anyone without specific electrical knowledge, by carefully following the provided installation manual.
Simply attach it and plug it into a standard electrical outlet.

Yes, a detailed installation manual is included with each product (BalconyMax and HomeFlex).

We can also offer assistance by contacting us.

Yes, you can install a Plug & Play photovoltaic system. Multiple Plug & Play photovoltaic systems can be installed. However, the maximum power of 600 watts per meter circuit (= single-family house or apartment in a multi-family building) must not be exceeded. The Plug & Play photovoltaic system must comply with the requirements of the Federal Ordinance on Low-Voltage Electrical Equipment (OMBIT).

To find out whether a solar installation is authorized or not by the Confederation, contact the federal inspection of high current installations ESTI ( https://www.esti.admin.ch/ ), or inquire with the manufacturer of the installation.

1) Position the panels with a south-facing orientation in an area that is as least shaded as possible during the day

2) Adopt the optimal inclination with your adjustable support according to the season

3) Clean the panels once a year in spring.

Yes, under the following conditions:

1) On classic roofs of the following types: tile, slate, zinc, thatch, corrugated iron

If and only if the roof slope does not exceed 5°, you can install the station with its current support, weighting it with slabs.
Above 5°, it will not hold because of the high risk of slipping with wind and rain.

And on a flat roof, no worries, of course, as shown in our video.

For all roofs with slopes greater than 5°, contact us to receive a personalized quote to equip you with a roof mounting bracket that will be adapted to the nature of your roof.

You can therefore combine the advantages of plug and play with installation on your roof.

2) On wooden roofs (pergola) or steel tray roofs (shelter):

Yes, always if the slope is < 5°, you can ballast it with slabs or fix it with screws and dowels using our 9 pre-drilled 8mm holes on the support.
On the other hand, if this roof has a slope/incline > 5° and < 25°, it will be necessary to fix it with screws and dowels using the holes provided in our exclusive panel support.

Yes, it is compatible with all electric meters: electronic meter or electromechanical meter, it will work in all cases.

You just need to check that your standard power outlet (16 Amps or more) is properly earthed and protected by a residual current device (RCD) of at least 30mA located in the main electrical panel of your home.

All electrical installations comply with these safety standards. However, we still recommend that you check that the electrical outlet complies with these standards.

The installation of our stations is very quick, allow approximately 5-15 minutes depending on the reference for unpacking and connection.

The SunnyPlug station stops operating to protect its users, your installation, and network technicians who may be working on the line.

This is a safety requirement to comply with current standards.

The distance between the two weighted feet of a support is 88 cm. Therefore, to be able to withstand winds of 60 to 100 km/h and avoid any risks, we recommend that you weight each support with a minimum of 60 kilos of weight, i.e. 30 kilos on one support foot and 30 kilos on the other support foot.

The most aesthetic and economical solution will be to buy 40cm X 40cm concrete slabs weighing 15 kg (value 10 CHF) from your DIY store. For each panel support, we therefore recommend 4 40cm X 40cm concrete slabs weighing 15 kg, i.e. a value of 20 CHF (2 slabs stacked on the left foot in a pile and 2 slabs stacked on the right foot).

In the event of a severe storm and winds exceeding 100 km/h, we advise you to temporarily reduce

the maximum inclination (smallest possible angle) to avoid wind resistance, and not take any risks with your high-value station.

It is best to connect SunnyPlug stations to an electrical circuit that is not overloaded and is protected by a standard circuit breaker.

It does not require a specific dedicated circuit, but check the manual for recommendations.

No, because we let you choose the anchors and screws that are suitable for the type of floor or wall.

Solar balconies are recommended by the Energy Office, especially for tenants. Just check your rental agreement to see if there's a specific clause prohibiting a privacy screen on the balcony. Because our solar panel is comparable to a traditional privacy screen. You won't need permission for that, will you? And if you move out, you can remove your installation without leaving a trace and take it with you.

Yes, by carefully following the installation manual and safety instructions, our stations are safe to install.

The system is designed to be plug-and-play with secure connectors.

Make an appointment with one of our advisors to refine this estimate based on your devices and the space available at home.

In most cases, know that 1 SunnyPlug station is ideal to start and measure the savings generated with your own eyes.

Our stations are scalable and connectable to each other, so you can add more later if needed or if you want to save more on your bill.

Thanks to its power and adjustable tilt, a SunnyPlug station will allow you to save around 35% of your annual bill (excluding heating).

How much you save depends on two factors:

- How much electricity does your station produce?

- How much do you pay per kWh?

We invite you to make an appointment with our experts so that they can give you an idea of ​​the production that you would be likely to generate with our stations and thus estimate the potential savings.

On average 3 years depending on your region, your sunshine and your orientation.

For a lifespan of 30 years and with a 25-year warranty.

Yes. You must notify your network manager in advance.